| Highlights | Specifications | To Order | .pdf File N/A  |
| Home | Products | ||
The FP85 microprocessor-based signal conditioner provides the ultimate in system flexibility and convenience, with simultaneous 4-20 mA and open collector pulse outputs. The FP85 can be integrally mounted to the FP8500 series paddlewheel sensors utilizing the FP85NM or FP85DM integral mounting kit. The FP85 can also be remotely mounted, either on a panel (front mounted, utilizing the included captive self-tapping screws to thread into the panel wall) or on a pipe, wall, or tank with a universal mounting kit. The FP85 can be remotely used with the OMEGA® FP-5100, FP-5200, FP-5300, FP-3-1500, and FP-6000 paddlewheel flow sensors.
The three front keys control all programming and scaling of the FP85there are no pots to tweak or internal adjustments to make. Simply enter the K-factor, and the FP85 displays rate with field-adjustable decimal point, the mA output value, and the date of last reprogramming. The 8-digit alphanumeric LCD shows every program step in clear language, allowing display in any engineering units with timebase in seconds, minutes, hours, or days. A special pushbutton sequence permits entry into the programming, thus providing security from unauthorized reprogramming. The FP85 also has a 4.00 mA or a 20.00 mA output calibration signal for scaling of remote readout devices.
The front panel of the FP85 is rated NEMA-4X/IP65, and the captive silicone gasket ensures watertight integrity in all mounting configurations.
SPECIFICATIONS:
Sensor Wetted Parts:
FP8501, FP8502: body: glass-filled polypropylene; shaft: titanium (PVDF optional); rotor: PVDF
FP8503: body and rotor: PVDF; shaft: Hastelloy C
(PVDF optional)
Frequency Range: 5 to 500 Hz max.
Response Time: Adjustable: 1.2, 4.8, or 9.6 sec
Operating Ambient: -15 to 70°C
(5 to 158°F)
Storage Temp.: -15 to 80°C (5° to 176°F)
Shipping Wts: 0.5 kg (1 lb.) for each item.
| Model No. | Price | Description |
| Signal Conditioning Module | ||
| FP85 | $371 | Programmable module with 4-20 mA and pulse outputs |
| Sensors for integral mounting (requires FP85NM or FP85DM integral mounting hardware) | ||
| FP8501 | 196 | 1/2" to 4" pipe, polypropylene body/titanium shaft |
| FP8502 | 211 | 5" to 8" pipe, polypropylene body/titanium shaft |
| FP8503 | 407 | 1/2" to 4" pipe, PVDF body/Hastelloy C shaft |
For all-plastic units with PVDF shaft, add suffix "-AP" to sensor model number and $40 to the price.
| Model No. | Price | Description |
| Integral mounting kit, for mounting on top of FP85XX sensors | ||
| FP85NM | $46 | Integral mounting with 1/2" NPT conduit ports |
| FP85DM | 46 | Same as DP85NM, with PG13.5 threaded DIN conduit ports |
| Universal mounting kit, for remote mounting on pipe or wall | ||
| FP85UNM | 46 | Universal mounting with 1/2" NPT conduit ports |
| FP85UDM | 46 | Same as DP85UNM, with PG13.5 threaded DIN conduit ports |
Comes with complete operator's manual.
Ordering Example: FP85 signal conditioning module with 4-20 mA and pulse outputs ($355) plus FP8501 paddlewheel flow sensor for 1/2" or 4" pipe with a polypropylene body ($196), plus FP85NM integral mounting kit with 1/2" NPT conduit port ($46), $355 + 196 + 46 = $597.
|
| |||||
